DSONE Driver Installation Setup Guide

Content List:

The following consoles are supported: DS & DS Lite

1 x DS Lite

1 x Supercard DSONE Card (Slot-1)

1 x USB micro SD memory card readers/writers

1 x Micro SD/SDHC Memory Card

Software(Please Click the Driver/Firmware Name for the Latest Download)

Driver / Kernel

Official Website

After inserting the Micro SD/SDHC card into the card reader, go to My Computer.

b) Right click the driver representing the Micro SD/SDHC card memory card.

c) Choose Format

d) Click Start to format the memory card in FAT32

Note:

If your memory cards have capacity bigger than 32GB, please download the SD/SDHC/SDXC Memory Cards Format Software.

If your memory cards have capacity equal or smaller than 32GB, please download the SD/SDHC Memory Cards Format Software.

Detailed guide is available from the SD Association here. [http://www.sdcard.org/consumers/formatter/]

Insert SD/SDHC Memory Card into reader/writer.
Click on [Start], point to [All Programs] -> [Panasonic] -> [SD Formatter VX.X], and click on [SD Formatter VX.X].
- “X.X” means the version number of SD Memory Card Formatting Software.
- If “User Account Control” window is displayed on the screen, please click on [Arrow].
The main window is displayed on the screen.
Select the target drive by drive list and check SD/SDHC Memory Card size.
Click on [Format].
After clicking on it, confirmation window is displayed on the screen. Here, if [OK] is clicked, this software executes the format operation. On the contrary, if [Cancel] is clicked, this software cancels the format operation and returns to the main window.
The following status window is displayed on the screen during the format operation.
Note: [Cancel] on this window is available only if either “FULL (Erase ON)” or “FULL (Erase OFF)” is selected as format type option. If “QUICK” is selected as format type option, this button is not available.
After the format operation completion, click [OK] and remove the Memory Card from your PC.
Reinsert the memory card to the PC to start using the memory card.

Plug your memory card reader into a USB port on your Mac. Insert the Micro SD/SDHC card / Micro SD/SDHC card into the memory card reader's Micro SD/SDHC card / Micro SD/SDHC slot, and the Micro SD/SDHC card / Micro SD/SDHC card will mount on your Mac desktop.
In an open Finder window, single-click "Applications" in the Side-Bar and scroll down to find the Utilities folder. Find Disk Utility in the Utilities folder and double-click the "Disk Utility" application to launch it.
In the opened Disk Utility application, single-click to select the Micro SD/SDHC card / Micro SD/SDHC card in the left-hand Drives column. Then, single-click to select the "Erase" button in the top row of radio buttons. Select the format MS-DOS (FAT) to format the Micro SD/SDHC card / Micro SD/SDHC card on the "Volume Format" pop-up button. When you have finished selecting the formatting options, click "Erase."
A new dialogue box will pop up in "Disk Utility," asking if you are sure you wish to erase the Micro SD/SDHC card / Micro SD/SDHC card. Caution: Erasing the Micro SD/SDHC card / Micro SD/SDHC card will permanently erase any files. Make sure you have backed up any file you wish to keep. To continue with the formatting process, click "Erase."
Once the Micro SD/SDHC card / Micro SD/SDHC card has been erased, it will mount on your Mac desktop just as any other removable drive.

Unzip the files downloaded (using Winrar) on your PC
1. Winrar can be downloaded from www.download.com by searching for Winrar at the Search.
2. Unzip the files mentioned under the Software Preparation above, you will get:
Now copy the all the above three files to the root folder of the Micro SD /SDHC memory card.
Copy your own files, including music, movies, pictures and data to the microSD/SDHC memory card.
Plug in the microSD to the Supercard DSONE. Insert the Supercard DSONE with the microSD into the slot 1 of the DS console. Turn on the DS console.
You will see the WARNING – HEALTH AND SAFETY message. Touch the touch screen or press button A to continue.
Wait for a few seconds for the DSONE EOS to load.
Congratulation if you have come this far as you have successfully set up your Supercard DSONE. There you go. Enjoy your DS with the multimedia functions.