-
£19.99
-
£24.99
-
£28.99
-
£32.99
-
£189.91
-
£237.41
-
£275.41
-
£313.41
|
|
The M3i Zero is the latest development in flash cartridge technology for the Nintendo DS Lite. The M3i Zero is an adapter so you can use a micro SD Card up to 32GB with Your Nintendo DS / DS Lite / DSi / DSi XL this allows you to store much more and allows you to benefit from all the below features:
|
Key Features:
- Same size as an original DSi game cartridge
- Built-in PassMe (NO need for any boot cart/passcard etc.)
- Uses microSD memory card (Trans Flash) as storage.
- Boot clean dump images (downloadable from internet)
- Very simple to use: drag and drop files to the microSD card and play
- Standard FAT system support
- Supports different speeds of micro SD cards
- Runs games without any lag or slow down
- Upgradable Firmware ( OS / Bios / Kernel )
- Touch screen control and robust skinning support
- No battery needed, back up the save file directly into the microSD card: Never lose your saved games
- Auto detect the save type and automatically generate saver file
- Homebrew support , IO lib available on launch
- Watch movies directly, listen to MP3s and read TXT on the DSi via the use of Moonshell
- Supports Wi-Fi and DS browser.
Package Includes:
- 1 x M3i Zero Card (Slot-1)
- 1 x USB microSD memory card reader
- 1 x USB firmwaer writer
IMPORTANT INFORMATION
This is a device that requires software to be downloaded on it to enable it to work, a link to the software is provided on purchase and a step by step guide on how to load it on the card, a little knowledge of computers is necessary to do this.
Warning- - It is illegal to use an M3i Zero card for uses such as downloading illegal games, music, pictures, movies etc, this is backup device for property you own.
| Share your thoughts with other customers: |
 |
-
do not buy!
05/09/2011
By Kevin
[ Reply by xpertron.co.uk: Normally, the red LED light does not turn up because it is not plugged in properly. The cable is a very thin and small. Please make sure that the product cable is inserted in correctly. ]
-
Easy setup
23/05/2011
( FEATURED REVIEW )
';
By Jon
Took a while to find it but then it was just Flash it Play it
-
M3i Zero
12/05/2011
By Keith
[ Reply by xpertron.co.uk: Dear Keith,
Once we have received the returns unit, we will be in touch via email and send you the refund accordingly.
Regards. ]
-
the perfect flash card
07/04/2011
( FEATURED REVIEW )
';
By xi
I used to have a M3 REAL for my DSL, now I have this GMP-Z003 for my DSi, working like a charm, especially with SAKURA + touchpad dual system.
The DRAWBACK is that when inserting a micro sd card, you have to push really hard to have the embedded SPRING MECHANIC work, but the spring is way too fragile, which means it might break anytime depends on your luck, so, do it gentlely
-
Excellent.
25/03/2011
( FEATURED REVIEW )
';
By Tony
-
usual good product
10/05/2010
By Innes
-
m3i zero
22/03/2010
By Dacombe
xpertron were very slow on delivery...if it is going to take a little time, why dont they tell their customers...most dont mind the wait.
-
Excellent product
06/03/2010
By Stewart
A lack of instructions in the box was my stumbling point, but a quick search on google and I had the information I needed. Two downloads later, a firmware flash and I was away.
Latest firmware and software can be downloaded here: http://www.handheldsources.com/M3DS/Download_M3DSR.html
The Sakura interface is wonderful.
-
Working well.
01/03/2010
By Letko
-
Not User Friendly
26/02/2010
By Soto
[Reply by Xpertron: shipping to USA takes 7 - 10 working days. For the setup guide, please click the download on the right of the navigation bar.]
-
Excellent
22/02/2010
By Reithmaier
Once done the card works perferctly on the Nintendo DSI.
Xperton delivery took exaktly one week to Germany.
-
M3i Zero: best card out there
20/01/2010
By Byrne
-
delay in delivery
27/12/2009
By Chan
[reply xpertron: Hi Billie, we are sorry that the first item was lost before Christmas and the second one arrived after the Christmas, when the weather was extremely bad.]
| Have a question for this item: |
 |
-
Tack:
M3i Zero GMP Z003 does not work with
10/10/2011
-
Dear Tack,
Please follow the guide here to upgrade the firmware of your M3izero.
Please performing the upgrading on the DSi XL v1.4.1.
Kind regards,
xpertron.co.uk Team
-
Smith:
dsi xl ver. 1.4.3E
22/09/2011
-
Dear Smith,
Could you please follow the guide here to upgrade the M3izero to be compatible with 1.4.2 via firmware USB first? Then please reinsert the M3izero to the DSi to see whether it's recognized or not. If you can see the icon, you can update the m3izero by following the guide here to be compatible with 1.4.3 via dsi.
Kind regards,
xpertron.co.uk Team
-
Brown:
Firmware fix 1.4.3E
08/09/2011
-
Dear Brown,
Could you please follow the guide here to upgrade your DS Console to be compatible with DSi v 1.4.3.
Kind regards,
xpertron.co.uk Team
-
Styre:
Firmware 1.4.3
05/09/2011
-
Dear Styre,
Please follow the setup guide here to upgrade your M3i Zero to be compatible with DSi XL v1.4.3.
Kind regards,
xpertron.co.uk Team
-
Du Preez:
M3i zero firmware
02/09/2011
-
Dear Du Preez,
M3i Zero is compatible with the DSi (XL) now. Could you refer to the guide here to upgrade the M3iZero.
Kind regards,
xpertron.co.uk Team
-
Smith:
m3i zero
21/07/2011
-
Dear Smith,
All M3i come without the firmware flashed and can't be detected by the DSi. ''No game card inserted'' message is an indicator that the card can't be detected yet as the compatible firmware has not been flashed properly.
In the case of 1.4.3 firmware fix, the M3i Zero is yet to release the 1.4.3 firmware patch. Hence, the M3i does not support the DSi with the firmware 1.4.3 yet. However, we expect the M3 team to release the patch in the very near future.
Kind regards,
xpertron.co.uk Team
-
Bates:
no sd card
30/04/2011
-
Dear Bates,
In order to solve the problem as soon as possible, could you please tell us which driver version you use? Could you please
1. do a print screen showing what files you have on the microSD?Guide on the print screen is here.
2. send us the picture of your DSi's screen with error message on it?
3. take the pictures of the front and back side of the m3izero card?
Thank you for your understanding and sorry for any inconvenience caused.
Kind regards,
xpertron.co.uk Team
-
Pollard:
m3izero
23/04/2011
-
Dear Pollard,
Kind regards,
xpertron.co.uk Team
-
Ferris:
Update
02/04/2011
-
Dear Ferris,
-
Pattinson:
no sd card found
01/04/2011
-
Dear Pattinson,
Could you please find another micro sd card to test the M3izero? If the problem still exists, please contact us soon. Sorry for any inconvenience caused.
Kind regards,
xpertron.co.uk Team
-
Hudson:
Firmware????
21/12/2010
-
Dear Hudson,
-
Homewood:
M3i zero card not working
18/12/2010
-
Dear Homewood,
M3i Zero team releases the new cartridge M3i Zero with a slightly different build as compared to the old M3i Zero. Some users have reported that they have the problem flashing the M3i Zero: LED Light Doesn't Blink and Stays On While Flashing
According to the M3i Zero team, the solution for the problem is to make sure that the microSD memory card is fully formated using FAT 32 format.
However, some users have reported that the following may also solve the problem:: try holding the connection cable at different angles….it's pretty fidgety that one,needs an exact angle or else it won't work.
Kind regards,
xpertron.co.uk Team
-
Charles:
M3i Zero Setup Guide
08/05/2009
-
Dear Charles,
Dear Charles,
Thank you for your message. To upgrade the firmwrae for M3i Zero, please visit the firmware upgrade guide here.
Kind regards,
xpertron.co.uk Team
-
Mark:
M3i Zero Setup Guide
07/05/2009
-
Dear Mark,
Dear Mark,
Thank you for your message. To setup the M3i Zero, please visit the installation guide here.
Kind regards,
xpertron.co.uk Team
Reference: M3i Zero Setup Guide for 3DS 3.0.0-5 and DSi / DSi XL 1.4.3
Important:
Please note that not every M3i Zero needs firmware fix!
Please follow the M3i Zero Driver Setup Guide to setup the card first.
If you get the error message like this :
An error has occured. Press and hold the POWER Button to turn the system off. Please refer to the Nintendo DSi Operations Manual for details.
Please check the firmware version of your DSi or 3DS according to these two steps:
- Click SETTING (with the Tool Icon) on the main menu
- Check the right hand corner of the top screen which says VER 1.x.x
Then choose the correspondent firmware fix guide below to upgrade your M3i Zero to be compatible with your DS console.
Content List:
- DS Compatibility
-
Preparation
- Hardware
- Software
- Installation
DS Compatibility
The following consoles are supported: DS, DS Lite, DSi, DSi XL & 3DS.
For DSi & DSi XL, the supported firmware versions are: 1.1, 1.2, 1.3, 1.4, 1.4.1, 1.4.2 & 1.4.3
For 3DS, the supported firmware versions are: 1.0.0-0, 1.1.0-1, 2.0.0 - 2, 2.1.0-3, 2.2.0-4, 3.0.0-5 & 3.0.0-6
Preparation (Checklist Before Installation)
Hardware
1 x DS Lite / DSi/DSi XL/ 3DS
1 x M3i Zero Card (Slot-1)
1 x USB Micro SD memory card reader
1 x USB firmware writer
1 x Micro SD/SDHC Memory Card
Software (Please Click the Driver / Firmware Name for the Latest Download)
| Firmware Fix For 3DS 3.0.0-5 & DSi / DSi XL 1.4.3 | F_CORE_v3.0.5 |
| Driver / Kernel | G6&M3DS-R_M74 |
| Official Website | www.m3adapter.com/ |
Installation
Please upgrade the M3i Zero firmware first before installing the driver if you want to use the M3i Zero on the DSi with the latest compatible firmware.
Format a Micro SD/SDHC Card
- Using Windows XP/Vista/7 Format Tool
- Using Panasonic Memory Card Format Program
- Using Mac Memory Card Format Tool
Using Windows XP/Vista/7 Format Tool
After inserting the microSD into the card reader, go to My Computer.
b) Right click the driver representing the microSD memory card.
c) Choose Format
d) Click Start to format the memory card in FAT32
Using Panasonic Memory Card Format Software
Note:
If your memory cards have capacity bigger than 32GB, please download the SD/SDHC/SDXC Memory Cards Format Software.
If your memory cards have capacity equal or smaller than 32GB, please download the SD/SDHC Memory Cards Format Software.
Detailed guide is available from the SD Association here. [http://www.sdcard.org/consumers/formatter/]
- Insert SD/SDHC Memory Card into reader/writer.
-
Click on [Start], point to [All Programs] -> [Panasonic] -> [SD Formatter VX.X], and click on [SD Formatter VX.X].
- “X.X” means the version number of SD Memory Card Formatting Software.
- If “User Account Control” window is displayed on the screen, please click on [Arrow].
- The main window is displayed on the screen.
- Select the target drive by drive list and check SD/SDHC Memory Card size.
- Click on [Format].
- After clicking on it, confirmation window is displayed on the screen. Here, if [OK] is clicked, this software executes the format operation. On the contrary, if [Cancel] is clicked, this software cancels the format operation and returns to the main window.
-
The following status window is displayed on the screen during the format operation.
Note: [Cancel] on this window is available only if either “FULL (Erase ON)” or “FULL (Erase OFF)” is selected as format type option. If “QUICK” is selected as format type option, this button is not available. - After the format operation completion, click [OK] and remove the Memory Card from your PC.
- Reinsert the memory card to the PC to start using the memory card.
Using Mac Memory Card Format Tool
- Plug your memory card reader into a USB port on your Mac. Insert the microSD / microSDHC card into the memory card reader's microSD / microSDHC slot, and the microSD / microSDHC card will mount on your Mac desktop.
- In an open Finder window, single-click "Applications" in the Side-Bar and scroll down to find the Utilities folder. Find Disk Utility in the Utilities folder and double-click the "Disk Utility" application to launch it.
- In the opened Disk Utility application, single-click to select the microSD / microSDHC card in the left-hand Drives column. Then, single-click to select the "Erase" button in the top row of radio buttons. Select the format MS-DOS (FAT) to format the microSD / microSDHC card on the "Volume Format" pop-up button. When you have finished selecting the formatting options, click "Erase."
- A new dialogue box will pop up in "Disk Utility," asking if you are sure you wish to erase the microSD / microSDHC card. Caution: Erasing the microSD / microSDHC card will permanently erase any files. Make sure you have backed up any file you wish to keep. To continue with the formatting process, click "Erase."
- Once the microSD / microSDHC card has been erased, it will mount on your Mac desktop just as any other removable drive.
M3i Zero Firmware Fix for 3DS 3.0.0-5 & DSi / DSi XL 1.4.3 Via Firmware USB
Note:
- All machines are upgradeable even your machine has already been in firmware 3.0.0-5 or 1.4.3. And no need to find another bootable machine to perform the upgrading process.
-
Risk-free: flash card will not be damaged even the upgrading process is not successfully.
-
Unzip the firmware ( F_CORE_v3.0.5 ) and driver ( G6&M3DS-R_M74) downloaded (using Winrar) on your PC
- Winrar can be downloaded from www.download.com by searching for Winrar at the Search.
-
Unzip the files mentioned under the Software Preparation above, you will have one folder and one file as follows.
F_CORE_v3.0.5 G6&M3DS-R_M74 F_CORE.DAT SYSTEM
-
Select all the two unzipped files and copy them to the root of microSD / SDHC memory card after you have formatted the micro SD / SDHC card in FAT32.
-
Insert Micro SD/SDHC card into the M3i
-
Put the upgrade cable into the M3i. The shinny metal contact of the cable, i.e. the side with the ARROW on it, should face the BACK of the M3i.
-
Plug the USB port into your PC, or anything that has a port that will give it power
-
The M3i should blink for about 15~20 seconds. After it stops blinking, your M3i is flashed.
Note:
LED blinks - in progress
LED lights off - no power or incomplete
LED lights on - error (no "f_core.dat" or wrong file etc.)
-
If the LED light turns RED (without flashing), it means the update is unsuccessful. Please repeat the whole process from step 1 after you have checked the Possible Reasons For Upgrade Failure listed belowfollowing:
- Put the upgrade file into sub directory, not the root directory, and the firmware writer can not detect the upgrade file.
- USB port can not provide a stable power, please change a stable USB port.
- There are too many disk defragments in the MicroSD memory card, which needs to be formatted before upgrade. For memory card formatting, please refer to the guide under Format a MicroSD / SDHC card above.
M3i Zero Driver Setup Guide
-
Unzip the file (G6&M3DS-R_M74)downloaded (using Winrar) on your PC
- Winrar can be downloaded from www.download.com by searching for Winrar at the Search.
-
Unzip the files mentioned under the Software Preparation above, you will have ：
-
Select all the unzipped files and copy them to the microSD memory card
-
Copy your own files, including music, movies, pictures and other data to the Micro SD / SDHC memory card.
-
Plug in the Micro SD / SDHC to the M3i Zero. Insert the M3i Zero with the microSD into the slot 1 of the DS console. Turn on the DS console.
-
For DS & DS Lite, you will see the WARNING – HEALTH AND SAFETY message. Touch the touch screen or press button A to continue.
-
For DSi or DSi XL, you will see the following icon with the name ALEX RIDER STORMBREAKER THQ. Touch the icon or press button A to continue.
-
Wait for the M3i Zero to load.
-
Congratulation if you have come this far as you have successfully set up your M3i Zero. There you go. Enjoy your DS with the multimedia functions.
Frequently Bought With
|
M3i Zero 3DS - Nintendo 3DS... £24.99 |
|
|
MicroSDHC 8GB £12.50 |
|
|
MicroSDHC 4GB £9.50 |
|
|
M3i Zero 3DS - Nintendo 3DS... £28.99 |
|
|
MicroSD 2GB £6.50 |
|
|
M3i Zero 3DS - Nintendo 3DS... £32.99 |
Company Info
Customer Services
Shipping & Returns
Other Businesses
